TP-Link T3700G-28TQ User Manual page 311

Configuration Procedure:
Select the desired port or LAG to set its priority. Click Apply.
Entry Description:
UNIT:1/LAGS:
Select:
Port:
Priority:
LAG:
Note:
1) All the ports in the same LAG should be assigned with the same port priority.
2) To complete QoS function configuration, you have to go to the Schedule Mode page to
select a schedule mode after the configuration is finished on this page.
Figure 12-7 Port Priority Config
Click 1 to configure the physical ports. Click LAGS to configure
the link aggregation groups.
Select the desired port to configure its priority. It is
multi-optional.
Displays the physical port number of the switch.
Specify the CoS queue that the port will be mapped to.
The packets are firstly mapped to CoS queues, then to TC
queues according to the 802.1P/CoS to Queue Mapping
relations.
Displays the aggregation group which the port is in.
300