Remote Log - TP-Link T3700G-28TQ User Manual

Entry Description:
Channel:
Severity:
Status:
Sync-Periodic

17.2.3 Remote Log

Remote log feature enables the switch to send system logs to the Log Server. Log Server is to
centralize the system logs from various devices for the administrator to monitor and manage
the whole network.
Choose the menu Maintenance → Log → Remote Log to load the following page.
Local log includes 2 channels: log buffer and log file.
Log buffer indicates the RAM for saving system log. The
channel is enabled by default. The information in the log buffer
is displayed on the Maintenance > Log> Log Table page. It will
be lost when the switch is restarted.
Log File indicates the flash sector for saving system log. The
information in the log file will not be lost after the switch is
restarted and can be exported on the Maintenance > Log>
Backup Log page.
Specify the severity level of the log information output to each
channel. Only the log with the same or smaller severity level
value will be output.
Enable or disable the channel.
Specify how frequent
synchronized to the log file.
Figure17-5 Log Host
406
the log information would be