TP-Link T3700G-28TQ User Manual page 391

Entry Description:
SNMP Traps

Multiple User:
CPU Thresholds:
Spanning Tree:
Link Status:
Storm Control:
Mbuf Thresholds
Mac Lock
Violation:
Dot1q:
Inventory:
Vrrp:
Pim:
Fan:
Power:
Temperature:
OSPF Traps

Virt If State
Change:
Nbr State
Change:
Virt Nbr State
Change:
If Config Error:
Virt Config Error:
Generates a trap when the same user ID is logged into the
switch more than once at the same time.
Generates a trap when the CPU utilization is over 80%.
Generates a trap when the status of STP changes.
Generates a trap when the up/down status of an interface
changes.
Generates a trap when the multicast or broadcast rate
exceeds the predefined value.
Generates a trap when the memory utilization is over 80%.
Generates a trap when a packet with a disallowed MAC
address is received on a locked port.
Generates a trap when creating or deleting a VLAN.
Generates a trap for Inventory.
Generates a trap for Virtual Routing Redundancy Protocol
(VRRP) changes.
Generates a trap for Protocol-Independent Multicast (PIM)
changes.
Generates a trap for fan.
Generates a trap for power.
Generates a trap for temperature.
Generates a trap when virtual interface state changes.
Generates a trap when non-virtual neighbour state changes.
Generates a trap when virtual neighbour state changes.
Generates a trap when configure mismatch errors occur on
non-virtual interfaces.
Generates a trap when configure mismatch errors occur on
virtual interfaces.
380