Network Diagram
Configuration Procedure
Configure Switch A:
Step Operation
1
Configure ports
2
Enable MSTP function
3
Configure
the
name and the revision of
MST region
4
Configure
VLAN-Instance mapping
table of the MST region
Configure Switch B:
Step Operation
1
Configure ports
Description
On VLAN→802.1Q VLAN page, configure the link type of the
related
ports
VLAN101-VLAN106. The detailed instructions can be found
in the section
On Spanning Tree→STP Config→STP Config page, enable
STP function and select MSTP version.
On Spanning Tree→Port Config→Port Config page, enable
MSTP function for the port.
region
On Spanning Tree→MSTP Instance→Region Config page,
configure the region as TP-Link and keep the default revision
setting.
On Spanning Tree→MSTP Instance→Instance Config page,
configure VLAN-Instance mapping table. Map VLAN 101,
103 and 105 to Instance 1; map VLAN 102, 104 and 106 to
Instance 2.
Description
On VLAN→802.1Q VLAN page, configure the link type of the
related
ports
VLAN101-VLAN106. The detailed instructions can be found
in the section
126
as
Trunk,
and
802.1Q
VLAN.
as
Trunk,
and
802.1Q
VLAN.
add
the
ports
add
the
ports
to
to