16.4.2 Port Config
On this page you can configure all ports' LLDP-MED parameters.
Choose the menu LLDP → LLDP-MED → Port Config to load the following page.
Configuration Procedure:
1)
Select your desired port and enable LLDP-MED. Then click Apply to make the settings
effective.
2)
Click Detail to configure the included TLVs in outgoing LLDPDU on the following page.
Entry Description:
UNIT:
Select:
Figure 16-7 LLDP-MED Port Configuration
Figure 16-8 Configure TLVs of LLDP-MED Port
Select the unit ID of the desired member in the stack.
Select the desired port to configure.
398