Choose the menu Switching→LAG→LAG Table to load the following page.
Configuration Procedure:
In the Global Config section, select the load-balancing algorithm. Click Apply to make the
settings effective.
In LAG Table, view the information of the current LAG.
Entry Description:
Hash Algorithm:
LAG Table
Select:
Group Number:
Description:
Member:
Figure 6-7 LAG Table
Select the Hash Algorithm, based on which the switch
can choose the port to send the received packets. In
this way, different data flows are forwarded on different
physical links to implement load balancing. There are six
options:
SRC MAC: The computation is based on the source
•
MAC addresses of the packets.
DST MAC: The computation is based on the
•
destination MAC addresses of the packets.
SRC MAC+DST MAC: The computation is based on
•
the source and destination MAC addresses of the
packets.
SRC IP: The computation is based on the source IP
•
addresses of the packets.
DST IP: The computation is based on the
•
destination IP addresses of the packets.
SRC IP+DST IP: The computation is based on the
•
source and destination IP addresses of the packets.
Select the desired LAG. It is multi-optional.
Displays the LAG number.
Displays the description of LAG.
Displays the LAG member.
64