Ethernet Connection; Table 4. Ethernet Pinout; Table 3. Craft/Control Pinout - ADTRAN IQ 710 System Manual

PIN NAME
1 DCD
2 RD
3 TD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 Unused

Ethernet Connection

The Ethernet port (RJ-48C) provides a 10BaseT Ethernet LAN connection, which is used for IP Routing,
TFTP, SNMP, and Telnet connections. The network connection follows, and Table 4 shows the pinout.
Connector type (USOC)
Part number
PIN NAME
1 TX1
2 TX2
3 RX1
4, 5 UNUSED
6 RX2
7, 8 UNUSED
© 2002 ADTRAN, Inc.

Table 3. Craft/Control Pinout

Carrier detect
Data received by the IQ 710
Data transmitted by the IQ 710
Data terminal ready
Ground - connected to unit chassis
Data set ready
Request to send - flow control
Clear to send - flow control
---
RJ-48C
AMP# 555164-2

Table 4. Ethernet Pinout

Transmit Positive
Transmit Negative
Receive Positive
—
Receive Negative
—
Section 2, Engineering Guidelines
DESCRIPTION
DESCRIPTION
61202800L1-1B
IQ 710
Page 25
IQ 710 System Manual