ADTRAN IQ 710 System Manual page 250

61202800L1-1B
IQ 710
Section 6, Configuration Guides
Page 250
By default,
AUTO DBU
unit to automatically dial the remote end once any of the DBU Criteria are met. This setting must
also be enabled in order for the IQ unit to automatically answer inbound calls from other units.
3. Use the right arrow key to select AUTO DBU; press
appear.
4. Use the down arrow to select E
ter will change to E
IQ 710 System Manual
is disabled. This parameter must be changed to
Figure 4. Auto DBU Selections
; then press
NABLE
and the screen shown in Figure 5 will appear.
NABLE
E
. The screen shown in Figure 4 will
<Enter>
. At this point, the AUTO DBU parame-
<Enter>
for the IQ 710
NABLE
© 2002 ADTRAN, Inc.