ADTRAN IQ 710 System Manual page 215

DBU Timers
1. Press
<Escape>
Select option 4, DBU T
played. The default values for the parameters on this screen are shown.
For basic dial backup operation, these parameters do not need to be altered from their default val-
ues. The
F T
AIL
teria have been met before entering dial backup. Once the Frame Relay link has been
reestablished on the network line, the
before disconnecting the dial backup call. The
attempts performed if dial backup is not established on the first call.
amount of time between redial attempts.
© 2002 ADTRAN, Inc.
once to get back to the C
and press
IMERS
Figure 26. DBU Timers Menu
programs the amount of time the IQ 710 will wait once any of the DBU Cri-
IMER
R
D B
ONFIGURE IAL ACKUP
The menu screen shown in Figure 26 is dis-
<Enter>.
sets the amount of time the IQ 710 will wait
T
ESTORE IMER
R C
EDIAL OUNTER
61202800L1-1B
Section 6, Configuration Guides
screen shown in Figure 22.
programs the number of redial
W R defines the
AIT TO EDIAL
IQ 710 System Manual
IQ 710
Page 215