Table 7. T1/Ft1 + Dsx-1 Network Interface Module Rj-48C Pinout (T1 Port); Table 8. T1/Ft1 + Dsx-1 Network Interface Module Rj-48C Pinout (Dsx Port) - ADTRAN IQ 710 System Manual

61202800L1-1B
IQ 710
Section 2, Engineering Guidelines
Page 28
The network connections follow, with the pinouts shown in Table 7 and Table 8 below.
Connector type (USOC) RJ-48C
Part number AMP# 555164-2

Table 7. T1/FT1 + DSX-1 Network Interface Module RJ-48C Pinout (T1 Port)

PIN NAME
1 R1 RXDATA-RING
2 T1 RXDATA-TIP
3 — UNUSED
4 R TXDATA-RING
5 T TXDATA-TIP
6, 7, 8 — UNUSED

Table 8. T1/FT1 + DSX-1 Network Interface Module RJ-48C Pinout (DSX Port)

PIN NAME
1 R1 TXDATA-RING
2 T1 TXDATA-TIP
3 — UNUSED
4 R RXDATA-RING
5 T RXDATA-TIP
6, 7, 8 — UNUSED
IQ 710 System Manual
Receive data from the network
Receive data from the network
—
Transmit data toward the network
Transmit data toward the network
—
Transmit data toward the PBX
Transmit data toward the PBX
—
Receive data from the PBX
Receive data from the PBX
—
DESCRIPTION
DESCRIPTION
© 2002 ADTRAN, Inc.