ADTRAN IQ 710 System Manual page 264

61202800L1-1B
IQ 710
Section 6, Configuration Guides
Page 264
3. Press the right arrow once and then down arrow until PVC O
and the screen shown in Figure 23 is shown.
Huntsville IQ 710 (DLCI 200)
1. Use the right arrow to select DLCI; then press
2. Use the right arrow to select DBU DLCI; then press
Notice that the TELCO-assigned DLCI of 200 for Huntsville's Frame Relay link to Atlanta is pro-
grammed in the
Huntsville is programmed in the
backup operation.
3. Use the right arrow to select DBU P
press . The phone number that the Huntsville IQ 710 will dial to reach the Atlanta IQ 710 to
<Enter>
establish a dial backup connection has now been programmed.
4. Use the right arrow to select C
the table to be prioritized in the event that multiple PVCs are lost at once. Dial backup will first be
attempted on the PVC with the lowest Call Order that meets the DBU Criteria settings. Set this
Call Order to 1.
5. Use the right arrow to select DBU O
<Enter>.
IQ 710 System Manual
Figure 23. PVC Options Menu
field. The TELCO-assigned DLCI of 100 for Atlanta's Frame Relay link to
DLCI
DBU DLCI
HONE
O
ALL RDER
I
N NACTIVE
PTIONS
. Type in 200 and press
<Enter>
. Type in 100 and press
<Enter>
field. These two entries are critical for proper dial
N ; then press
<Enter>
UMBER
N . DBU C O
UMBER ALL
; then press
<Enter>
is selected. Press
<Enter>
.
<Enter>
<Enter>
. Type in 17705552000 and
allows each DLCI listed in
RDER
. Select E and press
NABLED
© 2002 ADTRAN, Inc.
.