Connecting To The Iq 710 Using The N-Formant - ADTRAN IQ 710 System Manual

CONNECTING TO THE IQ 710 USING THE N-FORMANT

Introduction
This procedure details the steps which must be performed to connect to the IQ 710 using the N-Formant.
Prerequisite Procedures
Complete DLP-004, Setting IP Parameters for the IQ 710 and DLP-005, Verifying Communications Over
an IP LAN (steps 1 and 2 only).
Tools and Materials Required
• Access to a PC or other computer connected to the internet
• Web browser installed on PC. The N-Formant will work with Netscape Navigator 4.7 and 6.1 and with
Internet Explorer 5.5 or later.
• JAVA plug-in (from Sun). It must run on a platform that supports the previously mentioned browsers
(Netscape Navigator and Internet Explorer) and the plug-in.
• At least the 1.2 version of the JAVA Runtime Environment (JRE).
If JRE 1.3 or better is used, it will take advantage of JAR caching, so that the web browser
does not have to reload the applet from the unit every time it runs, instead using a cached
copy from the local hard drive.
© 2002 ADTRAN, Inc.
61202800L1-1B
Section 5, Detail Level Procedures
IQ 710 System Manual
IQ 710
Page 133