ADTRAN IQ 710 System Manual page 293

The next step is to program the application level traffic shaping. At this site, it was only necessary to have
the ability to place two simultaneous phone calls. Each phone call will require 25K of bandwidth. There-
fore, two simultaneous phone calls will require approximately 40% of the total port bandwidth.
3. Click on A
PPLICATION
the T S
RAFFIC HAPING
bandwidth of 50K and a maximum bandwidth equal to the port speed of 128K in the TX direction.
The resultant screen is shown in Figure 16.
Figure 16. Birmingham Applications TX Traffic Shaping menu
© 2002 ADTRAN, Inc.
T S and select RTP-I TX under PVC 20 in the index panel. Set
RAFFIC HAPING
to E . RTP in the TX direction should be programmed for a guaranteed
NABLED
61202800L1-1B
Section 6, Configuration Guides
Page 293
IQ 710 System Manual
IQ 710