ADTRAN IQ 710 System Manual page 257

DBU Timers
1. Press the left arrow key once and the down arrow key once to select DBU T
screen shown in Figure 13 is displayed. The default parameter values are shown below.
ERS
For basic dial backup operation, these parameters do not need to be altered from their default val-
ues. The
F T
AIL
ria have been met before entering dial backup. Once the Frame Relay link has been reestablished
on the network line, the
necting the dial backup call. The
formed if dial backup is not established on the first call.
time between redial attempts.
© 2002 ADTRAN, Inc.
Figure 13. DBU Timers Menu
programs the amount of time the IQ 710 will wait once any of the DBU Crite-
IMER
R T
ESTORE IMER
R
EDIAL
sets the amount of time the IQ 710 will wait before discon-
C programs the number of redial attempts per-
OUNTER
W
AIT TO
61202800L1-1B
Section 6, Configuration Guides
. The DBU T
IMERS
R defines the amount of
EDIAL
IQ 710 System Manual
IQ 710
Page 257
-
IM