ADTRAN IQ 710 System Manual page 57

C >S
ONFIGURATION YSTEM
If the T M
RAP ANAGER
for all traps generated by the IQ 710.
C >S
ONFIGURATION YSTEM
Enter the IP address of the SNMP manager to which the IQ 710 sends traps.
C >S
ONFIGURATION YSTEM
Enter the IQ 710 port used to transmit traps to the SNMP manager.
Choices: N , DTE P
ONE
C >S
ONFIGURATION YSTEM
Enter a descriptive name for the unit. This name can help you distinguish between different installations.
Enter up to 20 alpha-numeric characters in this field, including spaces and special characters (such as an
underbar). The name is then displayed in the terminal menu. This selection is only available for the termi-
nal interface.
C >S
ONFIGURATION YSTEM
The proprietary option affects the following functions: remote login, delay measurement, sequence number
checking, and dial backup. The following sections describe the interaction of the proprietary option and
these functions:
Remote Login
Both units must have the proprietary option set to enabled in order for
properly.
If the proprietary option is disabled on the unit, the
choice on the unit's menus via the terminal interface. If the proprietary option is enabled on the
local unit but disabled on the remote unit, the local unit will have the
menu, but the remote login will not be successful. The screen will lock at the "Any key to continue
or Ctrl-L <Enter> to exit" screen. Pressing Ctrl+L will unlock the screen.
Delay Measurement and Sequence Number Checking
Both units must have the proprietary option set to enabled in order for
S N
EQUENCE UMBER
If the proprietary option is disabled on the unit, the
options will not appear as a choice on the unit's menus via telnet or terminal interface. If
C
HECKING
the user tries to initiate a PVC loopback test, the unit will display "Proprietary Option Disabled."
If the proprietary option is enabled on the local unit and disabled on the remote unit, the local
units's PVC Loopback test will indicate Frames TX incrementing and Frames RX will be zero.
Dial Backup
Both units must have the proprietary option set to enabled in order for the
function properly. All DBU is proprietary (V.34, ISDN BRI, ISDN PRI, and DCE). The
© 2002 ADTRAN, Inc.
>T M O
RAP GR PTIONS
P is set for N
ORT ETWORK
>T M O
RAP GR PTIONS
>T M O
RAP GR PTIONS
; N P
ORT ETWORK ORT
>S N
YSTEM AME
>P
ROPRIETARY
C options to function properly.
HECKING
>T M
RAP ANAGER
or DTE, this parameter identifies the virtual circuit used
>T M
RAP ANAGER
>T M
RAP ANAGER
; C /C P
RAFT ONTROL ORT
O
PTIONS
R L
EMOTE OGIN
D M
ELAY EASUREMENT
61202800L1-1B
Section 4, User Interface Guide
DLCI
IP
P
ORT
, E P
.
THERNET ORT
to function
R L
EMOTE OGIN
option will not appear as a
option on the
R L
EMOTE OGIN
D M
ELAY EASUREMENT
and
S
EQUENCE
D B
IAL ACKUP
IQ 710 System Manual
IQ 710
Page 57
and
N
UMBER
options to