ADTRAN IQ 710 System Manual page 237

DBU Options
1. From the C
ONFIGURE
The screen similar to Figure 50 will appear. The default parameter values for this screen are
shown.
For basic dial backup operation, these parameters do not need to be altered from their default val-
ues.
The
A A
NSWER
option is still the controlling option. If
DBU
call regardless of how
expected results are shown below.
Signaling Type
ANSI T1.617-D/LMI/ITU-T Q.933-A
ANSI T1.617-D/LMI/ITU-T Q.933-A
ANSI T1.617-D/LMI/ITU-T Q.933-A
ANSI T1.617-D/LMI/ITU-T Q.933-A
In addition, the
feature. The
O
RIGINATE
© 2002 ADTRAN, Inc.
D B screen, select option 2, DBU O
IAL ACKUP
Figure 50. DBU Options Menu
option must work in conjunction with the
LWAYS
A A
NSWER LWAYS
Auto
DBU
Enabled
Enabled
Disabled
Disabled
feature must work in conjunction with the
A A
NSWER LWAYS
feature only appears when the unit is programmed for a non
/A
NSWER
is disabled, the unit will not answer the
A DBU
UTO
is set. Examples of the various combinations and
Answer
Always
Enabled Unit will answer an incoming call.
Disabled Unit will not answer an incoming call
Enabled Unit will not answer an incoming call
Disabled Unit will not answer an incoming call
61202800L1-1B
Section 6, Configuration Guides
; then press
<Enter>
PTIONS
option. The
A DBU
UTO
Result
O /A
RIGINATE
IQ 710 System Manual
IQ 710
Page 237
.
A
UTO
NSWER