ADTRAN IQ 710 System Manual page 77

T >PVC L
EST OOPBACK
Minimum round-trip time (in seconds) for the current test.
T >PVC L
EST OOPBACK
Maximum round-trip time (in seconds) for the current test.
T >PVC L
EST OOPBACK
Average round-trip time (in seconds) for the current test.
T >PVC L
EST OOPBACK
Number of frames lost in the receiving direction (traveling from the remote IQ to the local
T >PVC L
EST OOPBACK
Number of frames lost in the transmitting direction (traveling from the local IQ 710 to the remote IQ).
T >DSX L
EST OOPBACK
A DSX loopback test allows the user to initiate a loopback test at the DSX-1 interface. Select N
a test in progress. Only available with a T1/DSX Network Interface Card installed.
T >DSX L
EST OOPBACK
Select L to execute a line loopback test at the DSX-1 port. During this test, data loops back toward the
INE
terminal equipment (usually a PBX) connected to the DSX-1 port. Only available with a T1/DSX Network
Interface Card installed.
T >DSX L
EST OOPBACK
Select P to execute a port loopback test at the DSX-1 port. During this test, data loops back toward the
ORT
network interface. Only available with a T1/DSX Network Interface Card installed.
T >P >IP A
EST ING DDRESS
Enter the IP address of the unit the IQ 710 is sending and echo request (ping) to.
T >P >C
EST ING OUNT
This field defines the number of pings to be sent. Range is 1 to 99.
T >P >S (B
EST ING IZE
This field defines the size of the ping packet in bytes. Range is 1 to 1024.
T >P >T
EST ING IMEOUT
This field defines the time (in msec) the unit waits for a response between the pings. Range is 0 to 10000.
© 2002 ADTRAN, Inc.
>M R T
IN ESP IME
>M R T
AX ESP IME
>A R T
VG ESP IME
>L F
OST RAMES
>R L F
MT OST RAMES
>L >N
OOPBACK ONE
>L >L
OOPBACK INE
>L >P
OOPBACK ORT
)
YTES
( )
MS
61202800L1-1B
Section 4, User Interface Guide
IQ 710
).
ONE
IQ 710 System Manual
IQ 710
Page 77
to stop