ADTRAN IQ 710 System Manual page 218

61202800L1-1B
IQ 710
Section 6, Configuration Guides
Page 218
Call Screening
1. Press
<Escape>
Select option 6, C
played. The default values for the parameters on this screen are shown.
It is not necessary to adjust these parameters from their default values for basic Frame Relay dial
backup. With
C
parties matching one of the phone numbers configured for Number 1 through Number 5.
IQ 710 System Manual
once to get back to the C
S and press
ALL CREENING
Figure 29. Call Screening Menu
enabled, the IQ unit will only accept incoming calls from calling
S
ALL CREENING
D B
ONFIGURE IAL ACKUP
The menu screen shown in Figure 29 is dis-
<Enter>.
screen shown in Figure 22.
© 2002 ADTRAN, Inc.