ADTRAN IQ 710 System Manual page 3

About this Manual
This manual provides a complete description of the IQ 710 system and system software.
The purpose of this manual is to provide the technician, system administrator, and
manager with general and specific information related to the planning, installation,
operation, and maintenance of the IQ 710. This manual is arranged so that needed
information can be quickly and easily found. The following is an overview of the contents.
Section 1 System Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page - 15
Provides managers with an overview of the IQ 710 system.
Section 2 Engineering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . page - 19
Provides information to assist network designers with incorporating the IQ 710 system
into their networks.
Section 3 Network Turnup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . page - 31
Provides step-by-step instructions on how to install the IQ 710 unit, determine the
parameters for the system, install the network and option modules, and power up the
system.
Section 4 User Interface Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page - 37
Explains the VT-100 and Telnet interfaces, the VT-100 user interface conventions and the
IQ 710 top-level menu tree.
Section 5 Detail Level Procedures (DLP) . . . . . . . . . . . . . . . . . . . . . . page - 81
Provides the Detail Level Procedures for how to perform various unit functions
(upgrading firmware, telnet, etc.).
Section 6 Configuration Guides (CFG) . . . . . . . . . . . . . . . . . . . . . . . . page - 145
Provides step-by-step instructions for configuring some of the most common IQ 710
applications.
Section 7 N-Formant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page - 295
Describes how to navigate the N-Formant management system.
Revision History
This is the 2nd issue of this manual. This revision adds the traffic shaping feature.
© 2002 ADTRAN, Inc. IQ 710 System Manual