ADTRAN IQ 710 System Manual page 231

Call Screening
1. Use the arrow keys to select C
42 is displayed. The default values for the parameters on this screen are shown.
It is not necessary to adjust these parameters from their default values for basic Frame Relay dial
backup. With
C
parties matching one of the phone numbers configured for Number 1 through Number 5.
© 2002 ADTRAN, Inc.
S
ALL CREENING
Figure 42. Call Screening Menu
enabled, the IQ unit will only accept incoming calls from calling
S
ALL CREENING
Section 6, Configuration Guides
; press The menu screen shown in Figure
<Enter>.
61202800L1-1B
IQ 710
Page 231
IQ 710 System Manual