Dial Menu - ADTRAN IQ 710 System Manual

61202800L1-1B
IQ 710
Section 4, User Interface Guide
Page 78
T >P >R
EST ING OUND TRIP MIN
This field shows the shortest round-trip delay (in ms) of the received responses. Round-trip delay is
counted from the time the ping is sent until the response is received.
T >P >R
EST ING OUND TRIP AVG
This field shows the average response time (in ms) based on all received responses.
T >P >R
EST ING OUND TRIP MAX
This field shows the longest round-trip delay (in ms) of the received responses. If a response is not
received before the unit times out, the delay is not calculated in.
T >P >T P
EST ING X KTS
This field shows the number of pings sent (always 10).
T >P >R P
EST ING X KTS
This field shows the number of responses received from the pinged device.
T >P >L P
EST ING OST
This field shows the number of pings for which pings were transmitted and no response was received.
T >P >R S
EST ING ESET
Selecting this option will clear all ping statistics.
T >P >S /S
EST ING TART
This option will activate and deactivate the ping test.
T >N & DTE L
EST ET
This test will implement simultaneous dual loopbacks within the unit toward the network port and toward
the DTE port.
D M
IAL ENU
This menu is used for manual dial backup.
D >D B >E
IAL IAL ACKUP
Available for all DBU modules when DBU is idle. The user will enter a number to dial for dial backup in
this field.
D >D B >D
IAL IAL ACKUP
Available for all DBU modules when DBU is idle. Selecting this option will cause the unit to initiate the
dial.
IQ 710 System Manual
KTS
TATS
TOP
OOPBACK
D #
NTER IAL
<+>
IAL
© 2002 ADTRAN, Inc.