ADTRAN IQ 710 System Manual page 200

61202800L1-1B
IQ 710
Section 6, Configuration Guides
Page 200
DBU Timers
1. Press the left arrow key once and the down arrow key once to select DBU T
screen shown in Figure 9 is displayed. The default parameter values are shown below.
ERS
For basic dial backup operation, these parameters do not need to be altered from their default val-
ues. The
F T
AIL
teria have been met before entering dial backup. Once the Frame Relay link has been
reestablished on the network line, the
before disconnecting the dial backup call. The
attempts performed if dial backup is not established on the first call.
amount of time between redial attempts.
IQ 710 System Manual
Figure 9. DBU Timers Menu
programs the amount of time the IQ 710 will wait once any of the DBU Cri-
IMER
R
sets the amount of time the IQ 710 will wait
T
ESTORE IMER
R C
EDIAL OUNTER
. The DBU T
IMERS
programs the number of redial
W R defines the
AIT TO EDIAL
© 2002 ADTRAN, Inc.
-
IM