ADTRAN IQ 710 System Manual page 262

61202800L1-1B
IQ 710
Section 6, Configuration Guides
Page 262
Call Screening
1. Press the left arrow key and then the down arrow key to select C
in Figure 20 will be displayed. The default values for the parameters listed on this menu are
shown.
It is not necessary to adjust these parameters from their default values for basic Frame Relay dial
backup. With
C
parties matching one of the phone numbers configured for Number 1 through Number 5.
IQ 710 System Manual
Figure 20. Call Screening Menu
enabled, the IQ unit will only accept incoming calls from calling
S
ALL CREENING
S . The menu shown
ALL CREENING
© 2002 ADTRAN, Inc.