ADTRAN IQ 710 System Manual page 245

CONFIGURING PVC OPTIONS FOR REMOTE SITE 3 DSU IQ (BIRMINGHAM)
1. From the Main Menu terminal screen (Figure 47) of the DSU IQ, select option 1 for C
press . From the C
<Enter>
press The C
<Enter>.
2. From this menu, select 9, PVC O
ure 57 is shown.
3. Press 1 for DLCI. Press
uses for communication with Huntsville.
4. Press 2 for DBU DLCI. Press
Huntsville IQ 710 uses to communicate with Birmingham.
5. Press 3 for DBU P
6. Press 5 for DBU
parameter will be discussed in a later example.
Since there is only one PVC for Birmingham, there is no need to enter another entry into the PVC
table. At this point the Birmingham DSU IQ is configured for basic dial backup to Huntsville.
The
C
ONFIGURE
© 2002 ADTRAN, Inc.
menu (Figure 48), select option 2 for N
ONFIGURATION
N
ONFIGURE ETWORK
PTIONS
Figure 57. Configure PVC Parameters Menu
Type in 20 and press
<Enter>.
<Enter>.
N . Press
HONE UMBER
I . Press
<Enter>.
ON NACTIVE
screen is shown in Figure 58. The remaining options are fine
PVC
PARAMETERS
P M is displayed.
ORT ENU
is selected. Press
<Enter>
<Enter>.
Type in 38 and press
<Enter>.
Type in 12565551000 and press
<Enter>.
Press 2 for E
NABLED
61202800L1-1B
Section 6, Configuration Guides
ONFIGURATION
P
ETWORK ORT
and the screen shown in Fig-
This is the DLCI that Birmingham
This is the DLCI that the
<Enter>.
. Press The G
<Enter>.
IQ 710 System Manual
IQ 710
Page 245
and
and
ROUP