ADTRAN IQ 710 System Manual page 152

61202800L1-1B
IQ 710
Section 6, Configuration Guides
Page 152
DBU Options
1. Press the down arrow to select DBU O
will appear. The default parameter values for this screen are shown.
For basic dial backup operation, these parameters do not need to be altered from their default val-
ues.
The
A A
NSWER
DBU option is still the controlling option. If
call regardless of how
expected results are shown below.
Signaling Type
ANSI T1.617-D/LMI/ITU-T Q.933-A
ANSI T1.617-D/LMI/ITU-T Q.933-A
ANSI T1.617-D/LMI/ITU-T Q.933-A
ANSI T1.617-D/LMI/ITU-T Q.933-A
In addition, the
feature. The
O
RIGINATE
IQ 710 System Manual
Figure 6. DBU Options Menu
option must work in conjunction with the
LWAYS
A A
NSWER LWAYS
Auto
DBU
Enabled
Enabled
Disabled
Disabled
A A feature must work in conjunction with the
NSWER LWAYS
feature only appears when the unit is programmed for a non
/A
NSWER
; then press
<Enter>
PTIONS
A DBU is disabled, the unit will not answer the
UTO
is set. Examples of the various combinations and
Answer
Always
Enabled
Disabled
Enabled
Disabled
. The screen shown in Figure 6
option. The
A DBU
UTO
Result
Unit will answer an incoming call.
Unit will not answer an incoming call
Unit will not answer an incoming call
Unit will not answer an incoming call
O
RIGINATE
© 2002 ADTRAN, Inc.
A
UTO
/A
NSWER