ADTRAN IQ 710 System Manual page 203

9. Down arrow to select TX Y
N ; press enter.
O
10. Use the down arrow to select L
N , P
ONE AYLOAD
N . For troubleshooting, P
ONE
11. Down arrow to select T
Enabling the performance report messages (PRM) allows the unit to send messages across the
facility data link (FDL) per ANSI T1.403. The terminating device at the TELCO may use this infor-
mation for management of the T1 loop. The IQ 710 supports PRM messages per AT&T Pub
54016 which is a poll/response type protocol. Because of this poll/response nature, the transmit
PRM option does not disable the IQ 710 from processing or responding to 54016-type messages.
12. Press the left arrow until the screen shown in Figure 12 appears.
13. Down arrow to select S
played. The switch type selected here must match the TELCO CO switch providing the ISDN ser-
vice. Select L
UCENT
assume the switch type for all units is N
14. Down arrow to select LDN; press
Telephone Company and press
© 2002 ADTRAN, Inc.
A
ELLOW LARM
L
OCAL OOPBACK
, or L ; press enter. For normal operation, the local loopback should be left at
INE
or L
AYLOAD
PRM; then press
RANSMIT
Figure 12. Physical Layer Options Menu
T ; then press
WITCH YPE
5ESS, DMS 100, or N
<Enter>
<Enter>
; then press . Use the arrow keys to select Y
<Enter>
; then press
<Enter>
may be selected.
INE
. Choices of N
<Enter>
. A list of available switch types is dis-
<Enter>
. For the example network in Figure 1, we will
ATIONAL
. Down arrow to select N
ATIONAL
. Insert the Local Directory Number provided by the
. In our example the LDN is 5551000.
61202800L1-1B
Section 6, Configuration Guides
Page 203
. Use the arrow keys to select
and Y will appear.
O ES
; press
<Enter>
ATIONAL
IQ 710 System Manual
IQ 710
or
ES
.