Terminal Menu And System Control; Selecting The Appropriate Menu - ADTRAN IQ 710 System Manual

Session Management Keystrokes
To do this...
Log out of a session
Refresh the screen
To save time, only the portion of the screen that has changed is refreshed.
This option should only be necessary if the display picks up incorrect
characters.
Configuration Keystrokes
To do this...
Insert a new list item.
For example, add a new item to the list by pressing <I> while the cursor is over the
index number.
Delete a list item.
For example, delete an item from the list by pressing <D> while the cursor is over
the index number.
Getting Help
Press <CTRL+Z> to activate a help screen that displays the available keystrokes you can use to navigate
the terminal menu.
2.

TERMINAL MENU AND SYSTEM CONTROL

Selecting the Appropriate Menu

The terminal menu is the access point to all other operations. Each terminal menu item has several func-
tions and submenus that identify and provide access to specific operations and parameters. Use the chart
below to help select the appropriate terminal menu.
To do this...
Set network operating parameters for the DTE, network, and dial backup
interfaces, to provision system options.
Display status information for the DTE port, network port, DBU port,
ethernet port, Craft/Control port, and system.
Activate ping, Net and DTE Loopback, and PVC Loopback testing
functions.
Access dialing functions (only available when DBU card is installed).
Upgrade firmware.
© 2002 ADTRAN, Inc.
61202800L1-1B
Section 4, User Interface Guide
Press this key...
CTRL+L
CTRL+R
Press this key...
I
D
Go to this menu...
C
ONFIGURATION
V S
IEW TATISTICS
T
EST
D
IAL
F U
IRMWARE PGRADE
IQ 710 System Manual
IQ 710
Page 41