Network Interface Modules; 56K/64K Network Interface Module (P/N 1202801L1); T1/Ft1 Network Interface Module (P/N 1202802L1); Table 5. 56K/64K Network Interface Module Rj-48S Pinout - ADTRAN IQ 710 System Manual

61202800L1-1B
IQ 710
Section 2, Engineering Guidelines
Page 26
5.

NETWORK INTERFACE MODULES

The IQ 710 provides two expansion slots that allow different types of interfaces to be used. The following
is a discussion of the available Network Interface Modules.

56k/64k Network Interface Module (P/N 1202801L1)

The 56k/64k Network Interface Module provides a single 8-position modular jack to connect to the DDS
network. The 56k/64k Network Interface Module provides the following functions:
• Network performance monitoring and reporting
• Extensive self-testing
The network connection follows, with the pinout shown in Table 5 below.
Connector type RJ-48S
Part number AMP#555167-4

Table 5. 56k/64k Network Interface Module RJ-48S Pinout

PIN
1 R1
2 T1
3 UNUSED
4 UNUSED
5 UNUSED
6 UNUSED
7 T
8 R

T1/FT1 Network Interface Module (P/N 1202802L1)

The T1/FT1 Network Interface Module provides a single T1 port and complies with the applicable ANSI
®
and AT&T standards. The T1/FT1 Network Interface Module provides the following functions:
• AMI or B8ZS coding
• Manual line build-out
• D4 or ESF framing
• Network performance monitoring and reporting
• Test loopbacks
• Extensive self-testing
IQ 710 System Manual
NAME
Transmit data toward the network - Ring 1
Transmit data toward the network - Tip 1
Receive data from the network - Tip
Receive data from the network - Ring
DESCRIPTION
© 2002 ADTRAN, Inc.