CONNECTING THE IQ 710 TO AN EXTERNAL MODEM
Introduction
The IQ 710 can be accessed and managed via modem, allowing the same capabilities to the user as if con-
nected to the local
C
RAFT
C
, located on the back of the unit.
RAFT
Prerequisite Procedures
The IQ 710 should be mounted in its permanent location before connecting to an external modem.
Tools and Materials Required
•
Modem
•
Modem Cable
© 2002 ADTRAN, Inc.
/C
access port. Access is provided by a female DB-9 connector, labeled
ONTROL
61202800L1-1B
Section 5, Detail Level Procedures
IQ 710 System Manual
IQ 710
Page 89