Test Menu - ADTRAN IQ 710 System Manual

61202800L1-1B
IQ 710
Section 4, User Interface Guide
Page 76
T M
EST ENU
This menu allows you to perform diagnostics by initiating ping tests, PVC loopback tests, or NET and
DTE loopback tests. The T
T >PVC L
EST OOPBACK
Select the DLCI of the PVC to be tested.
T >PVC L
EST OOPBACK
Selecting <A > will start the PVC loopback test. Selecting <I
CTIVE
test. The T will display <A
S
EST TATE
option is enabled.
SUREMENT
T >PVC L
EST OOPBACK
Selecting this option will clear all the PVC L
T >PVC L
EST OOPBACK
R is the amount of time in seconds the PVC Loopback test will be active. The range is 0 - 3600.
EMAIN
T >PVC L
EST OOPBACK
Number of frames received on the selected PVC during the current loopback test.
T >PVC L
EST OOPBACK
Number of frames transmitted on the selected PVC during the current loopback test.
IQ 710 System Manual
menu is shown in Figure 4.
EST
Figure 4. Test Menu
>DLCI
>T S
EST TATE
> if either the
CTIVE
>R S
ESET TATS
OOPBACK
>R
EMAIN
>F R
RAMES X
>F T
RAMES X
> will stop an active PVC loopback
DLE
S N C
EQUENCE UMBER
statistics.
or
D M
HECKING ELAY EA
© 2002 ADTRAN, Inc.
-