ADTRAN IQ 710 System Manual page 109

4. Enter the remote DLCI (see the following note), and press
When entering the DLCI for a remote application, enter the DLCI associated with the
local unit that you are logged into (not the far end DLCI). The correct local unit DLCI for
that remote site may be determined by looking for the active DLCI in the
N
ETWORK
from the Huntsville site would enter a DLCI of 300.
5. The following login screen will appear.
6. Enter the password. The factory default password is adtran in lowercase letters.
© 2002 ADTRAN, Inc.
menu. In Figure 1, a user trying to configure the Atlanta unit
P /DLCI L
ORT IST
Section 5, Detail Level Procedures
.
<Enter>
V
IEW
IQ 710 System Manual
61202800L1-1B
IQ 710
Page 109
S /
TATISTICS