Display .And .Key .Functions; Display Mode/Settings Mode; Set Values - Set-Key; Value Presentation On The Main Display - Energetics E-102 User Manual

User Manual
Displays and key functions

Display mode/settings mode

The .display .shows .SCAN . . During .the .work .out .the .computer .is .always .in .the .
display .mode .
To .change .to .the .settings .mode .press .the .SET-key . . SCAN .disappears .from .the .
display .
!
During the work out you can switch to the settings mode. This is
only possible while idle. When the display shows STOP the mode
can be changed by pressing the MODE-key.
Set values – SET-key
With .the .function .key .SET .the .training .parameter .are .input .(workout .time, .
workout .distance .and .calories .used) .
• .Single .key .depression: .Setting .increases .by .one .value .
• .Press .key .2 .seconds: . T he .display .starts .scanning .through .the .values .quickly .
upward . . Stop .by .pressing .the .SET-key .again .
!
Settings cannot be adjusted downward. If to high of a value has
been input the setting has to be started over at 00. To do this
press the RESET- key, the display will return to 00.

Value presentation on the main display

The .read .out .on .the .main .display .alternates .every .6 .seconds .among .the .
various .values .
During .the .work .out .you .are .in .the .display .mode .and .can .choose .the .values .
to .be .displayed .by .pressing .the .MODE- key .