Computer Instructions; Mode Button; Button Functions - Energetics PR 4900p E-Z Computer Manual

Available languages

COMPUTER INSTRUCTIONS

To select and set

pre-values

START / STOP:

To start/stop the

exercise at any time

MODE

While the treadmill is not in motion, this button is used to select the individual programs P1 – P25.

SET / CLEAR

To set time, distance and calories values in standby status.

START /STOP

After the treadmill is turned on and the magnetic safety key is attached to the console, press the START/STOP button

to start or stop the treadmill.

QUICK SPEED BUTTON 3, 9

Press this button to adjust the speed quickly to 3 or 9 km/h.

SPEED + / SPEED –

While the treadmill is not in motion, these buttons are used to adjust various settings. To adjust the speed level during

the workout, press "SPEED +" or "SPEED –". Each button press increases or decreases the speed by 0.1 km/h. If you press

the button for more than 0.5 seconds, the speed will be changed in a quicker way.

www.energetics.eu

SPEED +/– BUTTON:

To change the running speed

and set the individual values

SET / CLEAR:

To set/clear individual values

3 / 9 QUICK

SPEED BUTTON

SAFETY KEY

Table of Contents