User Manual
Displays and key functions
Display mode/settings mode
The display shows SCAN . During the work out the computer is always in the
display mode .
To change to the settings mode press the MODE-key . SCAN disappears from
the display .
!
During the work out you can switch to the settings mode. This is
only possible while idle. When the display shows STOP the mode
can be changed by pressing the MODE-key.
Set values – SET-key
With the function key SET the training parameter are input (workout time,
workout distance and calories used) .
• Single key depression: Setting increases by one value.
• Press key 2 seconds: The display starts scanning through the values quickly
upward . Stop by pressing the SET-key again .
!
Settings cannot be adjusted downward. If to high of a value has
been input the setting has to be started over at 00. To do this
press the RESET- key, the display will return to 00.
Value presentation on the main display
The read out on the main display alternates every 6 seconds among the
various values .
During the work out you are in the display mode and can choose the values
to be displayed by pressing the MODE- key .