Computer Instructions; Button Functions - Energetics PR 3200p Computer Manual

COMPUTER INSTRUCTIONS

TIME / DISTANCE WINDOW
PROGRAM
BUTTON
To select the
individual
program
START BUTTON
To start the exercise

BUTTON FUNCTIONS

1. PROGRAM
While the treadmill is not in motion, this button is used to
select the individual programs (12 programs in total,
P1, P2 – P12).
2. MODE
While the treadmill is not in motion, this button is used to
select the individual target modes. Time counts down to
zero, distance counts down to zero, calories count down
to zero. After selecting the individual mode, please press
the speed up (+) or speed down button (–) to adjust the
data. After this, please press START to run the program.
The pre-set values will start running down to zero.
3. START
After the treadmill is turned on and the magnetic safety
key is attached to the console, press the START button to
start the treadmill.
4
www.energetics.eu
SPEED +/– BUTTON
To change the running speed
and set the individual values
4. STOP
Press this button to stop the treadmill at any time of the
exercise.
5. SPEED + / SPEED –
To adjust the speed level during the workout, press
speed up (+) or speed down (–). Each button press
increases or decreases the speed by 0.1 km/h. If you press
the button for more than 0.5 seconds, the speed will be
changed in a quicker way.
6. QUICK SPEED BUTTONS 3, 6, 9, 12
Press the button to adjust the speed quickly.
SPEED WINDOW
CALORIE / PULSE WINDOW
3 / 6 / 9 / 12
QUICK SPEED
BUTTONS
MODE
BUTTON
To select and
set pre-values
STOP BUTTON
To stop the exercise
at any time