6.5.2
6
• Function
To fine adjust the frequency command characteristics for VIA/VIB input, use the parameters
Setting frequency command characteristics
: VIA input point 1 setting
: VIA input point 1 frequency
: VIA input point 2 setting
: VIA input point 2 frequency
: VIB input point 1 setting
: VIB input point 1 frequency
: VIB input point 2 setting
: VIB input point 2 frequency
: Communication command point 1 setting
: Communication command point 1 frequency
: Communication command point 2 setting
: Communication command point 2 frequency
These parameters adjust the output frequency according to the externally applied analog signal (0-
10Vdc voltage, 4-20mAdc current) and the entered command for setting an external contact
frequency.
. ⇒ See section 6.5.4.
F-16
E6581381
to