Toshiba TOSVERT VF-FS1 Instruction Manual page 61

Key operated
ENT
ENT
or
ENT
ENT
( )
( )
MODE
MODE
If there is anything you do not understand during this operation, press the
start over from the step of
4.2.4 Setting a parameter, using the wizard function (
Wizard function (
The wizard function refers to the special function of calling up ten frequently used parameters.
You can set up the inverter easily by simply setting the parameters in one after another.
Notes on operation
• If there is anything you do not understand during this operation, press the
start over from the step of
or
[Parameter setting]
Title
Wizard function
LED display
Press the ENT key to enable the user parameter automatic edit
function.
Searches for parameters that are different in value from the standard
default setting and displays those parameters. Press the ENT key or
( )
the key to change the parameter displayed. (Pressing the
↓
moves the search in the reverse direction).
Press the ENT key to display the set value.
Press the
Press the ENT key to save the changed value. The parameter name
⇔ and the programmed value will flash on and off alternately.
After the change has been saved, "
Use the same steps as those given above to display parameters that
you want to search for or change setting with the
( )
When .
A search can be canceled by pressing the MODE key. Press the
MODE key once while the search is underway to return to the display
↓
of parameter setting mode.
After that you can press the MODE key to return to the status
↓
monitor mode or the standard monitor mode (display of operation
frequency).
display.
):
display.
is affixed respectively to the first or last parameter.
Function
D-7
Operation
key and key to change set value.
appears again, the search is ended.
MODE
MODE
Adjustment range
The wizard function refers to the
special function of calling up ten
frequently used parameters.
E6581381
key
" is displayed.
key and key.
key several times to
)
key several times to
Default setting
-
4