Toshiba TOSVERT VF-FS1 Instruction Manual page 113

[Parameter setting]
Title
VIA input point 1 setting
VIA input point 1 frequency
VIA input point 2 setting
VIA input point 2 frequency
VIB input point 1 setting
VIB input point 1 frequency
VIB input point 2 setting
VIB input point 2 frequency
Communication command point 1 setting
Communication command point 1 frequency
Communication command point 2 setting
Communication command point 2 frequency
Note: Don't set the same value between point 1 and point 2. If set the same falue, the
1) 0-10Vdc voltage input adjustment (VIA, VIB)
VIA, VIB terminals
Output
frequency
2) 4-20mAdc current input adjustment (VIA: VIA (SW3) slide switch in the I position)
VIA terminal
Output
frequency
Function
/
60 ( Hz )
/
0 ( Hz)
/
/
0 (%)
100 (%)
0
10V voltage signal
Frequency commnd
60 ( Hz )
0 ( Hz)
20 (%)
4
Frequency commnd
F-17
Adjustment range
0-100 (%)
0.0-200.0 (Hz)
0-100 (%)
50.0 (WP type)
0.0-200.0 (Hz)
60.0 (WN type)
0-100 (%)
0.0-200.0 (Hz)
0-100 (%)
50.0 (WP type)
0.0-200.0 (Hz)
60.0 (WN type)
0-100 (%)
0.0-200.0 (Hz)
0-100 (%)
50.0 (WP type)
0.0-200.0 (Hz)
60.0 (WN type)
・The output frequency with
respect to the voltage input is
adjusted according to the
selected reference point.
・Gradient and bias can be set
easily.
・The output frequency with respect to
the current input is adjusted
according to the selected reference
point.
・Gradient and bias can be set easily.
to to create a current
・Set
input from 0 to 20mA.
100 (%)
20mA current signal
E6581381
Default setting
0
0.0
100
0
0.0
100
0
0.0
100
is displayed.
6