Toshiba TOSVERT VF-FS1 Instruction Manual page 62

How to use the wizard function
Key operated
4
How Parameters of Quick setting wizard
LED display
MODE
ENT
( ) ****
Parameter
display
MODE
↓
MODE
↓
↓
MODE
Title Function
Automatic
acceleration/deceleration
Acceleration time 1
Deceleration time 1
Lower limit frequency
Upper limit frequency
Motor thermal protection
Meter adjustment
V/F control mode selection
Base frequency 1
Base frequency voltage 1
Displays the operation frequency (operation stopped).
(When standard monitor display selection
frequency])
The first basic parameter "
Press the ENT key to confirm your choice. The first parameter in the
purpose-specific wizard parameter group is displayed. (See Table below)
After moving to the purpose-specific wizard parameter group, change the
setting of each parameter by pressing the
is dialyzed on completion of the setting of the wizard parameter
group.
Press the MODE key to exit the wizard parameter group.
By pressing the MODE key, you can return to the default monitoring mode
(display of operation frequency).
D-8
E6581381
Operation
= [Operation
" (Wizard function) is displayed.
or key and the ENT key.