Toshiba TOSVERT VF-FS1 Instruction Manual page 194

(Continued)
Item displayed
Integral output
power
Rated current
Output speed
Communication
counter
Normal state
communication
counter
Past trip 1
Note 6
Note 6
Past trip 2
Note 6
Past trip 3
Note 6
Past trip 4
8
Parts replacement
Note 7
alarm information
Cumulative
Note 8
operation time
Default display
mode
Note 1: Items displayed can be changed by pressing
Note 2: You can switch between % and A (ampere)/V (volt), using the parameter
Note 3: The input (DC) voltage displayed is 1 2 times as large as the rectified d.c. input voltage.
Key
operated display
MODE
selection).
LED
Communic
ation No.
The integrated amount of power (kWh) supplied
FE77 from the inverter is displayed.
(0.01=1kWh, 1.00=100kWh)
The inverter rated current (A) at the occurrence of
FE70
a trip is displayed.
Displays the motor speed ( min-1) by calculating
FE90
with output frequency and pole numbers.
Displays the counter numbers of communication
FA15 through the network.
Note that they are current values, not at tripping.
Displays the counter numbers of communication
only at normal state in the all communication
FA16
through network.
Note that they are current values, not at tripping.
⇔
FE10 Past trip 1 (displayed alternately)
⇔
FE11 Past trip 2 (displayed alternately)
⇔
FE12 Past trip 3 (displayed alternately)
⇔
FE13 Past trip 4 (displayed alternately)
The ON/OFF status of each of the cooling fan,
circuit board capacitor, main circuit capacitor of
parts replacement alarm or cumulative operation
time are displayed in bits.
ON:
OFF:
FE79
operation time
The cumulative operation time is displayed.
FE14
(0.01=1 hour, 1.00=100 hours)
The cause of the trip is displayed.
or key in the each monitor mode.
H-8
E6581381
Description
Cooling fan
Control circuit board capacitor
Main circuit capacitor
(current/voltage unit