General Operation - Toshiba TOSVERT VF-FS1 Instruction Manual

Industrial inverter for 3-phase induction motors
Hide thumbs Also See for TOSVERT VF-FS1:
Table of Contents

Advertisement

I

General Operation

• Never disassemble, modify or repair.
This can result in electric shock, fire and injury. For repairs, call your sales distributor.
Disassembly
prohibited
• Never remove the front cover when power is on or open door if enclosed in a cabinet.
• Don't stick your fingers into openings such as cable wiring hole and cooling fan covers.
• Don't place or insert any kind of object into the inverter (electrical wire cuttings, rods, wires etc.).
Prohibited
• Do not allow water or any other fluid to come in contact with the inverter.
• Turn power on only after attaching the front cover or closing door if enclosed in a cabinet.
• If the inverter begins to emit smoke or an unusual odor, or unusual sounds, immediately
Mandatory
• Always turn power off if the inverter is not used for long periods of time since there is a
• Do not touch heat radiating fins or discharge resistors.
Prohibited
contact
The unit contains many high voltage parts and contact with them will result in electric shock.
This can result in electric shock or other injury.
This can result in electric shock or fire.
This can result in electric shock or fire.
If power is turned on without the front cover attached or closing door if enclosed in a
cabinet, this can result in electric shock or other injury.
turn power off.
If the equipment is continued in operation in such a state, the result may be fire. Call your
local sales agency for repairs.
possibility of malfunction caused by leaks, dust and other material. If power is left on with
the inverter in that state, it may result in fire.
These device are hot, and you'll get burned if you touch them.
Danger
Warning
2
E6581381
See item
2.
2.1
2.
2.
2.
2.1
3.
3.
See item
3.

Advertisement

Table of Contents
loading

Table of Contents