Toshiba TOSVERT VF-FS1 Instruction Manual page 63

4.2.5 Searching for a history of changes, using the history
function (
History function (
Automatically searches for 5 latest parameters that are programmed with values different from the
standard default setting and displays them in the
within this group
Notes on operation
• If no history information is stored, this parameter is skipped and the next parameter "
displayed.
•
and
How to use the history function
Key operated
MODE
ENT
ENT
ENT
( )
( )
MODE
MODE
MODE
Note: Parameter
)
):
.
are added respectively to the first and last parameters in a history of changes.
LED display
Displays the operation frequency (operation stopped).
(When standard monitor display selection
frequency])
The first basic parameter "
Select the History function (
The parameter that was set or changed last is displayed.
Press the ENT key to display the set value.
Press the
Press the ENT key to save the changed value. The parameter name
⇔
and the programmed value will flash on and off alternately.
Use the same steps as those given above to display parameters that
****
you want to search for or change setting with the
: First historic record
: Last historic record
( )
Parameter
display
Press the MODE key to return to the parameter setting mode
↓
" ."
After that you can press the MODE key to return to the status
↓
monitor mode or the standard monitor mode (display of operation
frequency).
↓
(Prohibition of change of parameter settings) is not displayed in this "
D-9
. Parameter setting can also be changed
Operation
" (Wizard function) is displayed.
) by pressing the
key and key to change set value.
E6581381
" is
4
= [Operation
or key.
key and key.
".