Toshiba TOSVERT VF-FS1 Instruction Manual page 22

3) Control circuit terminal board
1
The control circuit terminal board is common to all equipment.
Connector for common
serial communications
and option (RJ45)
Wire size
Solid wire: 0.3 ∼ 1.5 (mm
Stranded wire: 0.3 ∼ 1.5 (mm
(AWG 22 ∼ 16)
Sheath strip length: 6 (mm)
Screwdriver: Small-sized flat-blade screwdriver
(Blade thickness: 0.4 mm or less, blade width: 2.5 mm or less)
⇒ See section 2.3.2 for details on all terminal functions.
Factory default settings of slide switches
2
) SW4: SINK (Negative) side (WN type)
SOURCE (Positive) side (WP type)
2
) FM (SW2): V side
VIA (SW3): V side
A-10
E6581381
M3 screw
(0.5N•m)