Acceleration/Deceleration Time 2 - Toshiba TOSVERT VF-FS1 Instruction Manual

6.16 Acceleration/deceleration time 2

6.16.1 Selecting an acceleration/deceleration pattern
• Function
These parameters allow you to select an acceleration/deceleration pattern that suits the intended use.
Title
6
1)
2)
: Acceleration/deceleration 1 pattern
: S-pattern lower-limit adjustment amount
: S-pattern upper-limit adjustment amount
Function
Acceleration/ deceleration 1 pattern
S-pattern lower-limit adjustment
amount
S-pattern upper-limit adjustment
amount
Linear acceleration/deceleration
A general acceleration/
deceleration pattern.
This pattern can usually be
used.
S-pattern acceleration/deceleration 1
Select this pattern to
accelerate/decelerate the
motor rapidly to a high-speed
region with an output
frequency of 60Hz or more or
to minimize the shocks
applied during
acceleration/deceleration.
This pattern is suitable for
pneumatic transport
machines.
Adjustment range
0: Linear, 1: S-pattern 1, 2: S-pattern 2
0-50%
0-50%
Output frequency
[Hz]
Maximum frequency
0
Output frequency
[Hz]
Maximum frequency
Set frequency
0
×
Actual acceleration time
F-50
E6581381
Default setting
0
10%
10%
Time [s]
Time [s]
×