Standard Default Setting - Toshiba TOSVERT VF-FS1 Instruction Manual

5.5

Standard default setting

: Default setting
•
Function
Allows setting of all parameters to the standard default setting, etc. at one time.
Note that
default settings.
Title
Default setting
This function will be displayed as 0 during reading on the right. This previous setting is displayed.
Example:
cannot be set during the inverter operating. Always stop the inverter first and then program.
Programmed value
50Hz default setting (
Setting at
Hz. (This does not change the setting of any other parameters.)
Parameter
Parameter
⇒ See page K-14.
50Hz default setting (
Setting at
Hz. (This does not change the setting of any other parameters.)
Parameter
Parameter
⇒ See page K-14.
, , ,
Function
= )
causes all the following parameters to be set for operation using a base frequency of 50
, , , , ,
: According to model
= )
causes all the following parameters to be set for operation using a base frequency of 60
, , , , ,
: According to model
E-13
∼
and will not be reset to their factory
Adjustment range
0: -
1: 50Hz default setting
2: 60Hz default setting
3: Standard default setting
(Initialization)
4: Trip record clear
5: Cumulative operation time clear
6: Initialization of type information
7: Save user-defined parameters
8: Call user-defined parameters
9: Cumulative fan operation time
record clear
, : 50Hz
, : 60Hz
E6581381
Default setting
0
5