Canceling The Operation Command - Toshiba TOSVERT VF-FS1 Instruction Manual

[0: Supply voltage uncorrected, output voltage limited]
×Input voltage
Rated voltage
* The above applies when V/F control mode selection
parameter
[2: Supply voltage uncorrected, output voltage unlimited]
6
×Input voltage
Rated voltage
0
* The above applies when V/F control mode selection
parameter
Rated voltage

6.12.6 Canceling the operation command

• Function
[Parameter setting]
0
Output frequency
is set to "0" or "1".
>1 the output voltage can be prevented
Rated voltage
from exceeding the input voltage.
Output frequency
is set to "0" or "1".
>1 the output voltage can be prevented from
exceeding the input voltage.
: Reverse-run prohibition
This function prevents the motor from running in the forward or reverse direction when it receives the
wrong operation signal.
Title Function
Reverse-run prohibition
[1: Supply voltage corrected, output voltage limited]
Input voltage
High
Low
0
Output frequency
[3: Supply voltage corrected, output voltage unlimited]
Input voltage
High
Low
0
* Even if
voltage, the output voltage will exceed the voltage adjusted
by when the output frequency is higher than the base
frequency 1
Adjustment range
0: Forward/reverse run permitted
1: Reverse run prohibited
2: Forward run prohibited
F-38
Input voltage
High
Low
Input voltage
Output frequency
is set for an output voltage lower than the input
.
Default setting
E6581381
High
Low
0