Toshiba TOSVERT VF-FS1 Instruction Manual page 105

Assigning one function to an output terminal
Terminal
Title
symbol
RY - RC
FL
(A, B, C ）
When assigning one function to RY-RC terminals, set parameter
Do not change but leave parameters
(Default setting:
6.3.4 Assigning two functions to an output terminal
: Output terminal selection 1A (RY-RC)
: Output terminal selection 1B (RY-RC)
: Output terminal logic selection (RY-RC)
• Function
2 different functions can be assigned to the terminal board output terminal RY-RC.
Signals of 2 functions of the logical product (AND) or logical sum (OR) selected form 58 functions can
be output to 1 output terminal.
Function
Output terminal selection 1A
Output terminal selection 3
and
=255, =0)
F-9
Adjustment range
0-255
( ⇒ See page K-17)
only.
as they were set by default.
E6581381
Default setting
4 (Low-speed
detection signal)
10(Failure FL)
6