Modifying Output Terminal Functions - Toshiba TOSVERT VF-FS1 Instruction Manual

3) Sink (Negative) logic / Source (Positive) logic input
6.3.3
• Function
Examples of application
6
Sink logic/source logic (input terminal logic) switching is possible.
⇒ For more details, see section 2.3.2.

Modifying output terminal functions

: Output terminal selection 1A (RY-RC)
: Output terminal selection 3 (FLA, FLB, FLC)
Use the above parameters to send various signals from the inverter to external equipment.
By setting parameters for the RY-RC and FL (FLA, FLB and FLC) terminals on the terminal board, you
can use 58 functions and functions obtained by combining them.
To assign only one function to RY-RC terminals, assign the function to
and as they are set by default.
Function of FLA, B, C:
Can be set using parameter
Function of RY-RC:
Can be set using parameter
, ,
F-8
E6581381
while leaving