Table of Contents
Advertisement
6.4. Installation of Peripheral Devices
The CP6007 is designed to accommodate various peripheral devices, such as M.2 (SATA), PMC, XMC, and rear I/O
devices.
Prior to installation of a peripheral device, ensure that the safety requirements are met. Special attention must be
paid to avoid touching any components that may be hot, such as heat sink, etc.
Figure 11: CP6007-SA with M.2 card and heat sink installed
2
1
Figure 12: CP6007-RA with M.2 card installed, without heat sink
3
1.
M.2 Connector
2.
M.2 Module (with heat sink, marked yellow)
www.kontron.com
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
4
4
3.
M.2 Module (without heat sink)
4.
CP6007 Heat Sink
// 70
Advertisement
Table of Contents
