Installation Of Peripheral Devices; Connecting A Peripheral Device To The Cp6005X-Sa - Kontron CP6005-SA User Manual

8 . 4 I n s t a l l a t i o n o f Pe r i p h e r a l D e v i c e s
The CP6005(X)-SA is designed to accommodate various peripheral devices, such as SATA, PMC, XMC,
and rear I/O devices. The following figure shows the placement of the SATA Flash module and the
MMADP-SATA01 module, which is required for connecting an onboard HDD / SSD to the CP6005X-SA.
Prior to installation of a peripheral device, ensure that the safety requirements are met. Special atten-
tion must be paid to avoid touching any components that may be hot, such as heat sink, etc.
Figure 14: Connecting a Peripheral Device to the CP6005X-SA
SATA Flash
Module
SATA connector
SATA devices
MMADP-SATA01
Module
SATA connector
SATA devices
www.kontron.com
for external
2.5" SATA
HDD/SSD
for external
CP6005(X)-SA
Heat Sink
Heat Sink
User Guide
68